×ContactPhone:
+52-333-110-6800
E-mail:
info@celator.com.mx
Handle rotation 90° in both directionsOpening angle of hinges, applicable angle shown in numbersProfile cylinderRound cylinderBestLock cylinderScandinavian oval cylinderTool operated insertPadlock loop90° opening angle of hinges100° opening angle of hinges

Vision Swing Handle Ergonomic Line

Index Code:
1-005.15

Low profile swing handle used for Vision classic latching systems, traditional cams and round rods. It is used with either a 40 mm profile cylinder or equipped with a push button or a tool operated insert. The cylinder, push button or insert is in the dish of the swing handle, providing a more ergonomic way of operating the handle. 

The handle is spring loaded and pops out when it is unlocked or push button is pressed. Cylinder is covered by a sliding dust cover. IP66 waterproof according to NEMA 4.

Download PDF
Product Data Sheet
Download PDF
Industrilas cut out versions
Download PDF
Recommended Tightening Torque
DishGlass fibre reinforced polyamide (PA6GF30)
Dust coverGlass fibre reinforced polyamide (PA6GF30)
HandleGlass fibre reinforced polyamide (PA6GF30)
O-ringNBR
Push buttonGlass fibre reinforced polyamide (PA6GF30)
Shaft and turn stop for camZinc die cast, zinc plated
CutoutVersion C
Notes

MODEL WITH PROFILE CYLINDER: Turn-to-latch = The door is locked by turning the key.

MODEL WITH INSERT, PUSH-BUTTON OR ROUND CYLINDER:
Push-to-latch = Spring loaded cam latches when the handle is pushed in.

T = For door thickness: 0,8-3,5 mm.

* Handle supplied without profile cylinder.

StandardsIP66
NEMA 4
To download CAD-files, you need an Industrilas account. It only takes a minute.
or Create Account
A product number is created by combining the figures in each column (AAAA-BBCDE-FF)
AAAA Type
1531Swing handle 180°
1532Swing handle - Counter Clockwise
1533Swing handle - Clockwise
BB Insert / Cylinder
01Square 6
02Square 7
05Square 8
07Square 8 / slotted
11Square 8 / Recessed
14Triangle 7
15Triangle 8
16Triangle 10
22Double Bit 3
24Double Bit 5
26Slotted
29Slotted, recessed
32Hexagon 11
34Recessed hexagon 8
35Recessed hexagon 10
36Recessed hex 8/3mm pin
80Keyed to differ
81Keyed alike IL101
82Keyed alike IL0333
83For profile cylinder
90Push button
C Surface treatment insert
0For cylinder and push-button versions
2Chrome plated
6Black powder coated
D Protection degree
5IP65
E Door thickness
10,8 - 1,5 mm
21,6 - 2,5 mm
32,6 - 3,5 mm
FF Serial Number
00Standard Suffix