×ContactPhone:
+52-333-110-6800
E-mail:
info@celator.com.mx
Handle rotation 90° in both directionsOpening angle of hinges, applicable angle shown in numbersProfile cylinderRound cylinderBestLock cylinderScandinavian oval cylinderTool operated insert

Vision Swing Handle Highlander tool operated

Index Code:
1-004.03

Low profile swing handle for control mechanism with insert. Vision Highlander design withstands 1000 hours in salt fog and 45 Nm torque. Available in turn-to-latch version where the door is locked by turning the key and push-to-latch version where the spring-loaded cam latches when the handle is pushed in. The handle is padlockable and the spring- loaded padlock loop retracts when the handle is released. Suitable for doors with 0.8–3.5 mm thickness.

Download PDF
Product Data Sheet
Download PDF
Industrilas cut out versions
Download PDF
Recommended Tightening Torque
DishZinc die cast, black coated or fibre glass reinforced polyamide (PA6GF30)
HandleZinc die cast, black coated or fibre glass reinforced polyamide (PA6GF30)
InsertStainless steel 304
Padlock loopStainless steel 304
Pivot shaftZinc die cast, special surface treatment (passes 30 day salt-spray test according to ISO 9227, equivalent to ASTM B 117.)
CutoutVersion C
StandardsIP66
NEMA 4
To download CAD-files, you need an Industrilas account. It only takes a minute.
or Create Account
A product number is created by combining the figures in each column (AAAAAAABC-DDDDE)
AAAAAAA Material
1216117Handle zinc / dish PA6
1216417Handle zinc / dish zinc
B Door thickness T
10,8 - 1,5 mm
21,6 - 2,5 mm
32,6 - 3,5 mm
C PDL
0No
1Yes
DDDD Insert
9001Hexagon 11
9047Recessed hex 8 / 3 mm pin
E Model
0Turn-to-latch
1Push-to-latch

PDL = Spring loaded padlock loop retracts when handle is released.