×Contact Phone:
+52-333-110-6800 E-mail:
info@celator.com.mx

Vision Swing Handle Ergonomic Line

Index Code:

1-005.15

Low profile swing handle used for Vision classic latching systems, traditional cams and round rods. It is used with either a 40 mm profile cylinder or equipped with a push button or a tool operated insert. The cylinder, push button or insert is in the dish of the swing handle, providing a more ergonomic way of operating the handle.

The handle is spring loaded and pops out when it is unlocked or push button is pressed. Cylinder is covered by a sliding dust cover. IP66 waterproof according to NEMA 4.

DownloadsMaterialTechnical Information

Download PDF	Product Data Sheet
Download PDF	Industrilas cut out versions
Download PDF	Recommended Tightening Torque

Dish	Glass fibre reinforced polyamide (PA6GF30)
Dust cover	Glass fibre reinforced polyamide (PA6GF30)
Handle	Glass fibre reinforced polyamide (PA6GF30)
O-ring	NBR
Push button	Glass fibre reinforced polyamide (PA6GF30)
Shaft and turn stop for cam	Zinc die cast, zinc plated

Cutout

Version C

Notes

MODEL WITH PROFILE CYLINDER: Turn-to-latch = The door is locked by turning the key.

MODEL WITH INSERT, PUSH-BUTTON OR ROUND CYLINDER:
Push-to-latch = Spring loaded cam latches when the handle is pushed in.

T = For door thickness: 0,8-3,5 mm.

* Handle supplied without profile cylinder.

Standards

IP66
NEMA 4

To download CAD-files, you need an Industrilas account. It only takes a minute.

A product number is created by combining the figures in each column (AAAA-BBCDE-FF)

AAAA	Type
1531	Swing handle 180°
1532	Swing handle - Counter Clockwise
1533	Swing handle - Clockwise

BB	Insert / Cylinder
01	Square 6
02	Square 7
05	Square 8
07	Square 8 / slotted
11	Square 8 / Recessed
14	Triangle 7
15	Triangle 8
16	Triangle 10
22	Double Bit 3
24	Double Bit 5
26	Slotted
29	Slotted, recessed
32	Hexagon 11
34	Recessed hexagon 8
35	Recessed hexagon 10
36	Recessed hex 8/3mm pin
80	Keyed to differ
81	Keyed alike IL101
82	Keyed alike IL0333
83	For profile cylinder
90	Push button

C	Surface treatment insert
0	For cylinder and push-button versions
2	Chrome plated
6	Black powder coated

D	Protection degree
5	IP65

E	Door thickness
1	0,8 - 1,5 mm
2	1,6 - 2,5 mm
3	2,6 - 3,5 mm

FF	Serial Number
00	Standard Suffix

	Vision Three-Point cams Steel (1-008.51)
	Vision Two-Point cam Steel (1-008.51)
	Single-Point Cams Classic Steel (2-480)
	Single-Point Cams Classic SS 304 (2-480)
	Single-Point Cams Classic SS 316 (2-480)
	Vision Two-Point cam SS 304 (1-008.51)
	Vision Three-Point cams SS 304 (1-008.51)

	Round Rods pointed end (S-L) Steel (2-540)
	Round Rods with loop 15 mm rollers (R-L) Steel (2-541)
	Round Rods with Flat End (P) Steel (2-540)
	Round Rods for adapters 15 mm rollers (R) Steel (2-541)
	Round Rods for adapters 25 mm rollers (R) Steel (2-545)
	Round Rods pointed end (S-L) SS 304 (2-540)
	Round Rods for adapters 25 mm rollers (R) SS 304 (2-545)
	Round Rods for adapters 15 mm rollers (R) SS 304 (2-541)
	Round Rods with Flat End (P) SS 304 (2-540)
	Round Rods with loop 15 mm rollers (R-L) SS 304 (2-541)
	Round Rods with loop 25 mm rollers (R-L) SS 304 (2-545)
	Round Rod with loop 25 mm (R-L) Steel (2-545)

	Vision Plug (1-209)
	Profile Cylinders (1-210)
	Vision Profile Cylinder (1-211)

	Rod Guides Polyamide (2-560)
	Rod Guides (2-570)
	Bushings for round rods (2-570)

Build your own product here

Vision Swing Handle Ergonomic Line

Related products

Rod adapters

Cylinders

Cams

Similar products

Rods

Rod guides